View Full Version : Rebel Star Question
andyfairall
03-31-2014, 11:48 AM
Building a saber for my son, and I am using the Rebel Star LED. It has 4 pads on it, 2+ & 2-, and I'm not sure which to use or does it even matter as long as you have a + and -. My last was a LED Engin, so this should be a piece of cake.
9711
clahey83
03-31-2014, 11:53 AM
I would use the process of elimination. if you don't know what color it is I would start with 2v. put 2v on 1 + pad and ground one of the - pads. if that doesn't work move the ground to the other - pad, and if that doesn't work try the other + pad and try each of the - pads with that.
Silver Serpent
03-31-2014, 11:54 AM
Just use one of each. It doesn't matter which, so long as you have a + and a -.
andyfairall
03-31-2014, 11:55 AM
I know its green, just wasn't sure if the pads were specific or not
andyfairall
03-31-2014, 11:55 AM
Thanks Silver
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.