Hi...New Here and need my list checked please

[Skyleaf]

Hi all, hoping you will do me a favor and check my parts list for me and let me know if I am missing anything.

I am building 3 sabers but will also need to take the pommel off 2 of them to join them together which is why there is one double ended male adapter in the list. Thanks

here is my list
Drill & Tap Hole (8-32)
location: Blade retention screw for this 8-32 x 3/8" Stainless Steel thumb screw in LED blade holder style 3

8-32 x 3/8" Stainless Steel thumb screw
1/8" Adhesive lined heatshrink tubing
MPS Insert style 7
MPS Clip
Screw on LED blade holder style 3--MHS "new style" Heat Sink V2
MPS Pommel style 4
Hilt Style 1 (7" Double female threaded connector)--Machine Standard style switch hole
LED "TCSS style" Battle blade 1" OD ** Clear Standard
Double ended male threaded connector style 1
12 Colored Discs
Build Your Own Seoul P4 Electronics Kit include the following

4AA Battery holder
Seoul P4 (White)
Collimator Lens 5? viewing angle
3.3ohm 5w resistor
(Switch07) SPST Push on/off - Mom switch with black button
Seoul P4 Lens Holder

Ok so that is everything on my list. please let me know if I am missing anything

Thanks again
Skyleaf

[Sevinzol]

(Switch07) SPST Push on/off - Mom switch with black button

Looks like these are stunt sabers. I don't see a sound card listed so You'll want to use the latching switch instead of the momentary switch

[Silver Serpent]

That's actually a latching switch. The description is a little unusual. It can also be used as a momentary if you don't depress it fully.

That switch will work, provided you press it all the way down until it clicks.