PDA

View Full Version : Using EL (Electro Luminescent) Tape in the hilt (not the blade) to spice it up



A Pieroway
02-01-2014, 07:25 PM
Out of curiosity, has anyone ever managed to incorporate EL Tape into their hilt innards of a sabre to get a glowing effect. I know EL blades are covered in the forum, but I'm curious to try adding EL tape, or sheets, to add a glow affect in the hilts insides - perhaps wrap my battery with it to make it look all radioactive, or something. But, as i understand it they require AC which requires incorporating a DC -> AC circuit which is pushing it when you have only 3.7v (if you go with 1 x 18650) and not a lot of space to work with.

So, just looking for feedback or examples of anyone crazy enough to make that work.

Thanks,
Al

Silver Serpent
02-02-2014, 12:26 PM
It's been done, but it's fairly uncommon now. You'll need an inverter to convert to AC. Check this section of the forums for more info on working with EL: http://forums.thecustomsabershop.com/forumdisplay.php?2-Electroluminescent-Sabers