help with fx sb wiring.

[e13azar]

help please... im lost. tried so many combo's and dont want to fry anything.
this is a sb from a fx hasbro 2010 vader.
if someone could tell me how to wire it on my stunt saber thatd be great.
also do I need to use a momentary switch? if so can I use a led one and how do I wire it.

[e13azar]

here is the pic.
9156

[Sevinzol]

try this thread
http://forums.thecustomsabershop.com/-Cheapy-Hasbro-Wiring-Diagrams (http://forums.thecustomsabershop.com/showthread.php?8589-Cheapy-Hasbro-Wiring-Diagrams)

Its hard to tell by your photo but the PCB might have the solder spots labeled. I hope you recorded what wires went where before you cut them.

[e13azar]

Thanks for the link. I have looked at so many different threads now. Non of them seem to have the same wires as mine. I know what all these went to just need to know how to wire it to my saber now....
All the diff colored ones went to the LEDs
the blue says A and purple says B go to the clash.
Red and black too batteries
Yellows to switch
Greens to speaker
Grey says vss?
Then of course the pointless on off and try me switch.

[e13azar]

Still not sure how to wire it up to work best.

[e13azar]

Still not sure how to wire it up to work best.

Is there anyone that has worked with this exact board that can draw out a wireing chart for me? I'm having a real hard time lately trying to figure this out. Don't know why normally I'm real good about this stuff....

[Silver Serpent]

I wish I could help you, but I've given up trying to figure out all the eleventy million varieties of the FX/Hasbro saber boards. I can tell you that there is *probably* a thread detailing the wiring for your particular board, but it'll take you some time to find the exact one you're using.

[e13azar]

I wish I could help you, but I've given up trying to figure out all the eleventy million varieties of the FX/Hasbro saber boards. I can tell you that there is *probably* a thread detailing the wiring for your particular board, but it'll take you some time to find the exact one you're using.
I appreciate it. Where do you think I should start looking?

[e13azar]

In the meantime. If anyone else happens to know how or knows where to find it. That'd be awesome.
I'm in so much pain anymore I have a hard time thinking straight and figuring things out I used to be able to figure out.

[Silver Serpent]

http://forums.thecustomsabershop.com/forumdisplay.php?15-MR-and-Hasbro-to-luxeon-3w-conversions
http://forums.thecustomsabershop.com/forumdisplay.php?31-MR-Hasbro-FX-Lightsaber-Versions

Check through those two sections. If the diagram is anywhere, it's likely in there.

[Pinhead52]

It's an ultimate fx. Either Vader or Luke, I can't tell. The only reason I know is because I'm working with the exact same board for my next saber. Try this thread.
http://forums.thecustomsabershop.com/showthread.php?14696-Ultimate-FX-Lightsaber-Vader-board-New-Schematic&highlight=ultimate
Which also has a link to this thread;
http://forums.thecustomsabershop.com/showthread.php?13806-Sound-problem-on-2011-Ultimate-FX-sound-card&highlight=Ultimate+diagram
...which has a few other wiring diagrams and common issues. Good luck.