Hasbro sound board

[Noyl Wendor]

Could someone point me in the direction of a diagram of how to wire a hasbro soundboard into one of the EL hilts.
I've seen the link that you left in one of your previous posts, but for some reason it won't let me in.
Any other places I could go?

[Do-Clo]

It is in the thread index
http://thecustomsa.web133.discountasp.net/forum/viewtopic.php?t=1015

[Noyl Wendor]

That's a great diagram, I ended up with the Yoda light saber. That should work the same. I wanted to disconnect the sensor and just have the power on/off, and the hum.
If this all works off the 12 volt will that dim the blade? Probably shouldn't.

[Ambo]

Remember you will have to keep either the clash sensor or the motion sensor to keep the auto shutoff from shuttin off on ya....the motion and/or the shock sensor are what reset the timer that auoto shuts off the saber.....one of the built in battery protectors for the kids that like to drop the sabers and walk off....

[Noyl Wendor]

I think that the sensor that is on here is for both. I haven't gotten to the stage of putting it in. But it seems to me that the sensor that's on there will let the sound board work regardless. I will check it out further to make sure.
Thanks