View Full Version : US hilt an TCSS Blade
FrosteyKnight
05-02-2013, 10:32 AM
So i picked up an Ultra saber hilt from there 55.00 grab bag so i can have an offhand wepon but the questions is can i use a Corbin style blade from TCSS since i like the look of the blade better thank you for any help?
Silver Serpent
05-02-2013, 10:48 AM
Check the width of your current blade. It should be either 1", 7/8", or 3/4" in diameter. You can pick up a blade from TCSS in that size, and it should fit.
You may need to sand the blade a bit if the fit is too tight, or wrap it with a little clear tape if the fit is too loose.
Skinnerman02
05-02-2013, 10:51 AM
Yes. I have a blades from US and TCSS and both are interchangeable. At least with the hilts I've built and the old US Prophecy and Initiate hilts.
FrosteyKnight
05-02-2013, 10:58 AM
perfect thanks guys
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.