parts list and saber design (am i missing anything)

[MKnight]

2.1mm Power Jack
4 Wire quick connector x2
6 Wire quick connector
2X JST female connectors with shared ground
JST connectors x2
2 Wire quick connector x2
2.1mm plug adapter for smart charger
Kill plug style 2
resistor(s) yet to do diag waiting on led ;-)
Green LED indicator
Heatshrink tubing (assorted)

Acrylic Chassis Disc for PC 2.0 and pack
Acrylic Chassis Disc for Recharge Port

7.4v Li-ion 1050mAh 14650 Battery Pack
LED "TCSS style" Battle blade 1" OD
MHS "new style" Heat Sink V3
Petit Crouton Sound Module V2.0 (do i need sensors for movement and smash on crash for this board, or are they on the board)
Power Xtender™ 2.0
3.5mm R.I.C.E.™ Port Style 2
USB to 3.5mm R.I.C.E.™ cable
2w bass speaker
MHS speaker mount V3
buckpuck
16mm Anti Vandal Short Momentary Blue Dot Switch
16mm Anti Vandal Latching Blue Ring Switch
i have the led and the lense ;-) got one made up...

whats best for a blade retainer.

here are my designs

8188
i like the above one the most

8186

8187
saber parts (undecided)

[Forgetful Jedi Knight]

So far this looks good. You don't need a buckpuck. And you may also want to get a lens holder for the main LED lens.

[MKnight]

i got the following:

SR-08-00004 Predefined Quad LED Round Assembly, SR-08-00004 x 1 $27.09 $27.09
PL115106 Khatod 10° 25mm Narrow Beam Quad Optic with Integrated Mounting Legs x 1 $8.14 $8.14
ASTA-7G Arctic Silver Low Thermal Resistance Adhesive x 1 $19.85 $19.85
Will the normal lense holder be ok..?

So i dont need the sensors then ;-D

I have budgeted about £200 or $400 us for the build (yes im a uk jedi in training)

[Forgetful Jedi Knight]

i got the following:

SR-08-00004 Predefined Quad LED Round Assembly, SR-08-00004 x 1 $27.09 $27.09
PL115106 Khatod 10° 25mm Narrow Beam Quad Optic with Integrated Mounting Legs x 1 $8.14 $8.14
ASTA-7G Arctic Silver Low Thermal Resistance Adhesive x 1 $19.85 $19.85
Will the normal lense holder be ok..?

There are no links, but if these are the parts I think they are, then no.

[MKnight]

oh soz

http://www.luxeonstar.com/Rebel-23mm-Round-Quad-LED-Assemblies-s/390.htm

[Forgetful Jedi Knight]

oh soz

http://www.luxeonstar.com/Rebel-23mm-Round-Quad-LED-Assemblies-s/390.htm

Yeah, that's what I thought. No, you won't need lens holder, but be careful when you assemble that, you will have to make sure it's centered.

[MKnight]

Here we go

BOX9 Activation box style 9 $19.50 1 $19.50
Shilt1F 7" Fluted with standard style switch hole $21.00 1 $21.00
MHSchoker MHS choke style 3 $18.00 1 $18.00
Sledholder6 Screw on LED blade holder style 6 $27.00 1 $27.00
NHS2 MHS "new style" Heat Sink V2 $8.00 1 $8.00
MPS3v1 MPS Pommel style 3 v1 $15.00 1 $15.00
2.1PlugAdapter 2.1mm plug adapter for smart charger $2.50 1 $2.50
2.1Jack 2.1mm Power Jack $2.50 1 $2.50
TCSSBattle LED "TCSS style" Battle blade 1" OD (32 inches) •** Clear Standard $28.44 1 $28.44
LaserWork Acrylic Chassis Disc for PC 2.0 and 14500 side by side pack (Black) $3.99 2 $7.98
LaserWork Acrylic Chassis Disc for Recharge Port (Black) $3.99 1 $3.99
ST440AT Stainless 4-40 all thread $2.75 4 $11.00
BR316T Brass 3/16" OD tube $5.99 2 $11.98
SS316N Stainless Steel 4-40 Hex nut $0.15 10 $1.50
SH440 4-40 Socket Head $0.20 2 $0.40
SMRNB 16mm Anti Vandal Short Momentary Blue Ring Switch $12.00 1 $12.00
SLRW 16mm Anti Vandal Latching White Ring Switch $20.00 1 $20.00
Taphandle Tap handle $5.20 1 $5.20
1/16Heat 1/16" Heatshrink tubing $0.50 2 $1.00
3/32Heat 3/32" Heatshrink tubing $0.50 2 $1.00
1/8Heat 1/8" Heatshrink tubing $0.50 1 $0.50
QC6 6 Wire quick connector $3.00 2 $6.00
QC4 4 Wire quick connector $2.50 2 $5.00
JSTSHG 2X JST female connectors with shared ground $0.95 1 $0.95
JSTCon JST connectors $0.55 1 $0.55
Qconnector 2 Wire quick connector $0.70 1 $0.70
spkrmountv3 MHS speaker mount V3 $7.50 1 $7.50
BASSSPKR 2w bass speaker $6.50 1 $6.50
RP2 3.5mm R.I.C.E.™ Port Style 2 $2.00 1 $2.00
PXT Power Xtender™ 2.0 $6.11 1 $6.11
USBRICE USB to 3.5mm R.I.C.E.™ cable $10.00 1 $10.00
AccLED3 Green LED indicator $1.66 2 $3.32
3/4D 3/4" D-Ring $1.25 1 $1.25
8323TSC 8-32 x .3" anodized thumb screw $2.25 1 $2.25
MPSI6 MPS Insert style 6 $5.25 1 $5.25

[MKnight]

CRAP I FORGOT THE "Petit Crouton Sound Module V2.0"

Arrrggggghhhhh...............!

I ADDED IT ON THE MWS SABER BUILD PAGE WTF...!

[Silver Serpent]

I see a tap handle, but no tap. That may or may not be an issue, depending on whether you already have taps. I didn't notice a li-ion charger either.

You will want to get http://www.thecustomsabershop.com/MPS-Clip-P72.aspx to hold your pommel insert in place. Everything else appears to be in order.

[MKnight]

They are out of stock of the taps, will get one here in the UK, same with batterys and charger we have slighty diff voltage here so i left those out.

Nice one on the MPS clip that would have been really annoying (and costly with post for one item to the uk lol)

I have asked them to hold my order for the moment and charge me for the PCv2 will add the clip on as well.

many thanks for your feedback and help. its much apriciated.

[Silver Serpent]

I have substituted a paper clip for the MPS clip in an emergency. It does the job reasonably well.