brakndawnt
11-16-2012, 07:49 AM
Ok, just did wiring for the first time. Board works, sound works, leds work. In short, i have a 6 wire 700mA buck puck that i thought i needed, but didn't use. You'll see from the diagram I used a 9v for testing. I plan to replace that with three 3.7v li_ion batteries. Also, in testing, the switch (momentary) will not turn off the setup, it just stays on. Is this because the board originally had a toggle switch, or is the switch just faulty?
Anywho, could someone please maybe help me wire in the BP into my schematic? Also, does anyone know why the switch isn't working? Should i wire it differently or get a new switch?
Thanks in advance for your help, I have no idea what I'm doing. Without these boards, i wouldn't have what i do already.
7930
Anywho, could someone please maybe help me wire in the BP into my schematic? Also, does anyone know why the switch isn't working? Should i wire it differently or get a new switch?
Thanks in advance for your help, I have no idea what I'm doing. Without these boards, i wouldn't have what i do already.
7930