rusty_shackleford
10-03-2012, 12:45 PM
My goal is to have a switch that will have 3 different operations, ON using battery, OFF with the ability to charge, and ON with AC adapter.
I will be using a (4) AAA batteries with a 700ma buck puck to power a green luxeon rebel on a 10mm coolbase PCB along with (2) 3mm auxillary LEDs powered from the battery itself.
To do this I found a dual-pole, triple throw switch and created the wiring diagram attached.
My main question is: should I power the LEDs straight from the battery itself? or with the Buckpuck?
7771
I will be using a (4) AAA batteries with a 700ma buck puck to power a green luxeon rebel on a 10mm coolbase PCB along with (2) 3mm auxillary LEDs powered from the battery itself.
To do this I found a dual-pole, triple throw switch and created the wiring diagram attached.
My main question is: should I power the LEDs straight from the battery itself? or with the Buckpuck?
7771