PDA

View Full Version : Big damage! What I've to do? Help me please



artax
09-16-2012, 05:54 AM
Big damage! What I've to do? Help me please

7667

xl97
09-16-2012, 06:12 AM
any leads left to solder to?


buy another one.. people usually have these laying around after conversions.


what hilt/string blade is it?

artax
09-16-2012, 06:19 AM
I don't understand your first questioni, sorry, all the led of left works good.

It's an Hasbro Anakin 2007.

xl97
09-16-2012, 06:36 AM
first question was asking if ther was any leads (wires) left to solder it back together...and then secure both parts/ends..


however "I" think it would probably be best if you just sourced a new led string blade...

Where are you located?

artax
09-16-2012, 06:42 AM
If I understand well, I want to do that: led on left to solder it back together, and then secure both parts/ends.

I'm from Italy

xl97
09-16-2012, 06:52 AM
I dont have a led string blade to look at.. but there has to be TRACES on the 'ladder' that need to be soldered back together..


I would try to first secure the ladder part back together. (epoxy).. and let it dry...

then use some wire or copper foil to bridge/make a jumper for the traces that are broke on either side

(Im guessing sourcing a new one in Italy would be hard??)

maybe another Italy/overseas member has string blade they can ship to you??

makototsai
09-16-2012, 07:47 AM
HI~

The led strip is difficult to fix.
the best way is change one.

I have a lot of the MR LED strip.

if you need I can send to you, you just need to offer the shipping cost.
but I live Taiwan.

artax
09-17-2012, 06:17 AM
HI~

The led strip is difficult to fix.
the best way is change one.

I have a lot of the MR LED strip.


if you need I can send to you, you just need to offer the shipping cost.
but I live Taiwan.


Thank youMakoto, and do you know how much it cost for ship in Italy a led string?

artax
09-17-2012, 06:18 AM
I dont have a led string blade to look at.. but there has to be TRACES on the 'ladder' that need to be soldered back together..


I would try to first secure the ladder part back together. (epoxy).. and let it dry...

then use some wire or copper foil to bridge/make a jumper for the traces that are broke on either side

(Im guessing sourcing a new one in Italy would be hard??)

maybe another Italy/overseas member has string blade they can ship to you??

Thank you xl97,
it's true that is hard to find a led string in Itlay