View Full Version : Big damage! What I've to do? Help me please
artax
09-16-2012, 05:54 AM
Big damage! What I've to do? Help me please
7667
any leads left to solder to?
buy another one.. people usually have these laying around after conversions.
what hilt/string blade is it?
artax
09-16-2012, 06:19 AM
I don't understand your first questioni, sorry, all the led of left works good.
It's an Hasbro Anakin 2007.
first question was asking if ther was any leads (wires) left to solder it back together...and then secure both parts/ends..
however "I" think it would probably be best if you just sourced a new led string blade...
Where are you located?
artax
09-16-2012, 06:42 AM
If I understand well, I want to do that: led on left to solder it back together, and then secure both parts/ends.
I'm from Italy
I dont have a led string blade to look at.. but there has to be TRACES on the 'ladder' that need to be soldered back together..
I would try to first secure the ladder part back together. (epoxy).. and let it dry...
then use some wire or copper foil to bridge/make a jumper for the traces that are broke on either side
(Im guessing sourcing a new one in Italy would be hard??)
maybe another Italy/overseas member has string blade they can ship to you??
makototsai
09-16-2012, 07:47 AM
HI~
The led strip is difficult to fix.
the best way is change one.
I have a lot of the MR LED strip.
if you need I can send to you, you just need to offer the shipping cost.
but I live Taiwan.
artax
09-17-2012, 06:17 AM
HI~
The led strip is difficult to fix.
the best way is change one.
I have a lot of the MR LED strip.
if you need I can send to you, you just need to offer the shipping cost.
but I live Taiwan.
Thank youMakoto, and do you know how much it cost for ship in Italy a led string?
artax
09-17-2012, 06:18 AM
I dont have a led string blade to look at.. but there has to be TRACES on the 'ladder' that need to be soldered back together..
I would try to first secure the ladder part back together. (epoxy).. and let it dry...
then use some wire or copper foil to bridge/make a jumper for the traces that are broke on either side
(Im guessing sourcing a new one in Italy would be hard??)
maybe another Italy/overseas member has string blade they can ship to you??
Thank you xl97,
it's true that is hard to find a led string in Itlay
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.