PDA

View Full Version : Point's Charric build - MHS, CNC, Blaster Core - Pic Heavy



pointoforigin
09-06-2012, 09:33 PM
It's not a saber but it does still use MHS and Plecter products, so I thought I'd share this with you guys. I built this for my Mandalorian costume.

Mods please let me know if I need to resize images.


So I'm a fan of canon weaponry, even if that canon is ambiguous or not well known. The Charric is a weapon like a blaster from Chiss space. Wookiepedia's image of it looks like this:

http://images3.wikia.nocookie.net/__cb20060323042541/starwars/images/a/ab/Charric-FF.png

The top one has been done by someone on The Dented Helmet, I think they may be a member over here too but I'm not sure. I'm going for the bottom one, it has more appeal to me.

So I started with The Custom Saber Shop. The barrel looked really easy to put together from the MHS parts there. Then I 3D modelled those parts and the pieces that would become the handle and that front bit, which I have no name for.

http://i790.photobucket.com/albums/yy184/pointoforigin1/Screenshot2012-07-12at51902PM.png

Looks pretty good huh? I thought so, so I moved the files out to run them on a CNC router, which I just casually happen to have access to from time to time. Here we are setting it up and testing the first piece - (We is my brother and I)

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-07-14121316.jpg
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-07-14122003.jpg

The handle sides are MDF, so keeping the dust down is important -
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-07-14163954.jpg

And the first finished piece, fresh from the CNC -
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-07-14164949.jpg

That worked well, so we moved on and did the other side as well as the handle pieces -
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-07-21133643.jpg

And cleaned them up a bit -
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-07-21143848.jpg

Glues the sides together and did more cleanup, and then the order from TCSS came in.
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-01174750.jpg



So I carved out the top of the handle pieces so they would fit the barrel
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-02163206.jpg

Drilled a whole bunch of holes. Mounting points for the sling, holes for the LED's to sit in and shine through, holes for screws to mount the handle pieces to the aluminium barrel
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-02163237.jpg
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-02144357.jpg

Cut up some brass
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-02163114.jpg

And put it together to see how cool it looked :P
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-02163019.jpg



So the front shroud wasn't doing it for me. I decided to make a new one. Comparison shot:

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-07144128.jpg

And then cos that worked so well I followed those design cues for the rest of the shroud work:

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-07161317.jpg

So that's about 80% of the metalwork done.


So I started work on the electronics by bridging the SMD solder pads for resistors on the Blaster Core -

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-09114820.jpg

I'm not using the 6 LED ammo counter, the screen will be used for that purpose instead. So the bridged pads are the ones where the barrel ray LED's connect.

I also completely finished the barrel -

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-14163239.jpg

So there's now screws holding each shroud piece on. I stripped the threads on one of the central MHS pieces for ease of construction and it's now held together with a hidden set screw.

Here's an underside view, showing the holes for the mounting screws and the channels for wires at the handle end -

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-14163254.jpg

And in both of those you can see the ARKM razor blade plug, which totally makes this gun. It really does.




Got a bit of wiring done, nearly there...

The Blaster Core with the wires attached for the switches, trigger, etc
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-15113003.jpg

Halfway done with the barrel ray. The blue and green are common colour wires, the orange is individual control of each pair of LED's. You can see the resistors placed at the circuit board.
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-15101106.jpg

I accidentally soldered the wire for LED pair 1 to spot six... and 2 to five... and then realised and had to redo it :/

The main LED module all wired up. There's a Ledengin 10w RGBW LED in there, I'm using the green and the blue only.
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-15091831.jpg


Blaster core all wired up...
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-16084552.jpg

The handle section...
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-16144328.jpg

Nearly done...
http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-16151118.jpg

Finished pics before taking it to C6...
http://i790.photobucket.com/albums/yy184/pointoforigin1/FB_IMG_13451728322881410.jpg

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-17200506.jpg

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-17200524.jpg

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-17200554.jpg

http://i790.photobucket.com/albums/yy184/pointoforigin1/2012-08-17200733.jpg



I'll have to rewire it. There's a few changes to make to get it to a point that I'm really, really happy with it - but it's PRETTY good.

Changes for the future include:

- making the main flash be the right colour, finding the fault which makes the main ray colour not work (At present only Stun mode works)
- Recharge port and 2x18650 or similar stick battery pack instead of removable AA's
- Relocate the speaker further forward for better "audience effect"
- Cutting out the MHS under the rear shroud to better access the Blaster Core, and therefore require less wire mess inside
- Better looking trigger or cover for the switch that's there
- Couple more holes on the end of the barrel for the main flash to shine through the side as well
- Custom sound fonts. I am qualified to make such things ;) And blaster sounds are SO much fun to make.
- Utilise the 6 segment ammo bargraph
- Add a single shot/full auto switch and indicator light

Things that I'd do differently next time:

- Remodel the 3d file for the handle pieces to include mounting points for the screen
- Run the CNC slower to get more detail into the handle pieces
- Use standard round 5mm RGB LED's instead of the square ones for the barrel ray. Much easier to mount. OR-
- Use a single LED per segment instead of two, mounted in the bottom of the barrel facing upwards. The holes still show the progression of light through the barrel. <--- May do this anyway as an upgrade
- Drill more accurate holes in the barrel

FenderBender
09-06-2012, 10:17 PM
That...was AWESOME!!!!
Too bad I didn't run into you at CVI, I would have loved to see this puppy in person. Video?

pointoforigin
09-07-2012, 06:44 AM
No video yet - I'll probably do one when I do the upgrades ;) Glad you like it!

Crystal Chambers
09-07-2012, 06:52 AM
That is cool stuff....I considered doin something similar at one point. But you really put a lot into it. Yeah Vid would be great. Looking forward to seeing it in action.

pvcpo
09-07-2012, 08:04 AM
very cool!!

shmoetech
09-07-2012, 09:43 AM
That is freakin awsome!

Arryck Corso
09-07-2012, 04:23 PM
OMG...I want one!!!! Very, very cool!

koko kama
09-09-2012, 04:47 AM
WOW, to be honest this is truely something. excellent use of layers.

Zahc Zi Phan
09-09-2012, 11:12 AM
Dude that's awesome. I wanna come play! I have hardly any tools, but big aspirations. Haha. I frequently end up using silverware to accomplish tasks a screwdriver would be better suited for.

Vlad Doon
09-10-2012, 01:25 AM
Awesome.

Darth Ryo
09-10-2012, 05:53 AM
WOW, impressive :o

Boj-Vaati Mau
09-10-2012, 04:14 PM
Sweet! I liked the full stocked look better but that's personal taste. Now you need you some armor... ;)

pointoforigin
09-10-2012, 09:35 PM
Oh sorry, I need some armour to go with the gun? How's this:

http://farm9.staticflickr.com/8169/7968411172_22d0d16c60_c.jpg (http://www.flickr.com/photos/zeherfoto/7968411172/)
IMG_4933 (http://www.flickr.com/photos/zeherfoto/7968411172/) by zeherfoto (http://www.flickr.com/people/zeherfoto/), on Flickr

http://farm9.staticflickr.com/8454/7968409820_0e7aa44d23_c.jpg (http://www.flickr.com/photos/zeherfoto/7968409820/)
IMG_4935 (http://www.flickr.com/photos/zeherfoto/7968409820/) by zeherfoto (http://www.flickr.com/people/zeherfoto/), on Flickr

http://farm9.staticflickr.com/8296/7968408598_08e96d5860_c.jpg (http://www.flickr.com/photos/zeherfoto/7968408598/)
IMG_4936 (http://www.flickr.com/photos/zeherfoto/7968408598/) by zeherfoto (http://www.flickr.com/people/zeherfoto/), on Flickr

Does that pass muster? ;)

Mav750k
09-10-2012, 09:44 PM
Awesome

koko kama
09-11-2012, 01:28 AM
WOW, and i thought the Gun was impressive, Nicely done

Boj-Vaati Mau
09-12-2012, 03:59 AM
Yep, thatll do nicely! ;) & now we see why there's no stock on the gun too.

Starwinder
09-12-2012, 07:33 AM
Wow! Nicely done on the whole package!