View Full Version : Luxeon 3w driver
joe104
09-14-2006, 11:53 PM
i have a question about the Luxeon 3w driver. what is the difference between the latching and momentary?
xwingband
09-15-2006, 05:17 AM
Absolutly nothing. The only reason they come in two forms is because it makes them easier to put with sound boards.
Corbin_Das
10-27-2006, 11:25 AM
Hi there
The only difference between the two is the way the on/off switch works. The drivers themselves operate identically. The momentary one looks for the leads going to the on/off switch to close for a moment, then open back up. The latching one requires that the leads stay closes for as long as you want the saber turned on. I hope this helps.
Corbin
GusKenobi
10-05-2007, 01:04 PM
so i know this is an old thread but from what im reading that their is also a differnce if you intend to hook one up to an MR sound board? is that correct?
xwingband
10-05-2007, 01:31 PM
Yes, the difference is it won't work unless you use two seperate switches or some other crazy wiring solution.
You need the latching one to make it relatively simple.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.