PDA

View Full Version : MHS TPM Obi build log.



Xanatos1986
06-21-2012, 02:12 PM
Ok its been awhile since I did a build log, its been about a year my first was a starkiller, if you remember :).

anyway,

Im building a TPM Obi out of MHS parts Minus the Pommel, the pommel im using is a US pommel, which isnt bad but not as good as an acerocket, so when I find another acerocket ill replace it.

Ok so this is what Ive done sofar to the saber, its minor but I will update as I go.

I started with BH 3 (sorry for the fist 2 pics, idk why they saved this way)
http://i1239.photobucket.com/albums/ff512/gregorybear1986/Snapbucket/FF14C357-orig.jpg

I then grabbed my TCSS sleeve material and started makeing my emmitter crown.
http://i1239.photobucket.com/albums/ff512/gregorybear1986/Snapbucket/4CACF040-orig.jpg

I then cleaned it up, and filed the edges for the rim ring so it sits flush and isnt bulky.
http://i1239.photobucket.com/albums/ff512/gregorybear1986/Snapbucket/2435A67F-orig.jpg

Trim ring 2
http://i1239.photobucket.com/albums/ff512/gregorybear1986/Snapbucket/9D0DD49D-orig.jpg

and put together roughly LOL
http://i1239.photobucket.com/albums/ff512/gregorybear1986/Snapbucket/BC3CEE8D-orig.jpg

More to come hope you like it so far.

thejedilestat
06-22-2012, 02:57 AM
Verry nice start can't wait to see the rest.

Denz
06-04-2013, 11:15 AM
How did this build turn out?