my first saber plz help

[Luportare]

these are the parts ive chosen so far.. i need help knowing what else to get

1" Thick walled Polycarbonate 40" long
40" LED blade diffuser for 1" thick walled blades
Screw on LED blade holder style 10
Hilt style 1 with standard style switch hole
Pommel style 3
MWS Guarded Style Momentary Switches
Luxeon Rebel Star royal blue
Luxeon Rebel Lens Holder
Collimator Lens 8.7 deg viewing angle

i want to do a lithium battery pack but i have no clue what i need to set that up for the saber

[dustunite]

if your gonna use a guarded switch you'll need to change hilt style with guarded hole and don't forget the resistor. That will depend on your battery setup. If you want a lith setup than you'll also need a charger and then decide if you want to charge in-hilt then you'll need a recharge port.

[DarkarNights]

If this is a soundless saber, I suggest the MWS BuckPuck. Also, unless you will have a driver/soundboard that can make use of a momentary switch, I suggest going with a latching switch instead.