Salazark
06-07-2012, 11:00 AM
Hi, im a first time lightsaber builder and would this list of parts build a lightsaber, if not then what must I do?
Hilt style 3 with guarded style switch hole
MHS choke style 3
Screw on LED blade holder style 23
MHS "new style" Heat Sink
Pommel style 3
Main Body Powder Coating (Brilliant Brass) (SH31)
Choke Powder Coating (Wet Black) (CH31)
Blade Holder Powder Coating (Brilliant Brass) (B231)
Pommel Powder Coating (Wet Black) (PO31)
1" Hilt safety plug (Clear)
Star thermal tape pad
LED "TCSS style" Battle blade 1" OD (40 inches)
• ** Clear Standard
Black machined button for Covertec clip
Covertec Clip
SPST Momentary Guarded switch with black button
Build Your Own Seoul P4 Electronics Kit
• 4AAA Battery Holder with JST connector
• Seoul P4 (Blue)
• Collimator Lens 5° viewing angle
• 3.3ohm 5w resistor
• Push on/push off switch with black button
• Seoul P4 Lens Holder
8-32 x 1/4" socket head
Drill & Tap Hole (8-32)
location: in emitter for blade screw
8-32 x 1/4" Set screw
5/64" Allen wrench
Drill & Tap Hole (8-32)
location: In Hilt for covertec clip 8/32x1/4" socket head screw
:grin:
Hilt style 3 with guarded style switch hole
MHS choke style 3
Screw on LED blade holder style 23
MHS "new style" Heat Sink
Pommel style 3
Main Body Powder Coating (Brilliant Brass) (SH31)
Choke Powder Coating (Wet Black) (CH31)
Blade Holder Powder Coating (Brilliant Brass) (B231)
Pommel Powder Coating (Wet Black) (PO31)
1" Hilt safety plug (Clear)
Star thermal tape pad
LED "TCSS style" Battle blade 1" OD (40 inches)
• ** Clear Standard
Black machined button for Covertec clip
Covertec Clip
SPST Momentary Guarded switch with black button
Build Your Own Seoul P4 Electronics Kit
• 4AAA Battery Holder with JST connector
• Seoul P4 (Blue)
• Collimator Lens 5° viewing angle
• 3.3ohm 5w resistor
• Push on/push off switch with black button
• Seoul P4 Lens Holder
8-32 x 1/4" socket head
Drill & Tap Hole (8-32)
location: in emitter for blade screw
8-32 x 1/4" Set screw
5/64" Allen wrench
Drill & Tap Hole (8-32)
location: In Hilt for covertec clip 8/32x1/4" socket head screw
:grin: