PDA

View Full Version : Size for a Yoda Saber?



Grouch
08-31-2006, 01:26 PM
I've been playing with the MHS ordering trying to get a basic shape and I think it’s very possible it’s just the length of the hilt that seems to be the question. The smallest hilt you can make is 5.75 inches which when paired with a 24" blade will look funny. You can also make an 8.25 hilt which will look much better with the 24" or 26" blade and is about the right ratio of hilt to exposed blade length. Can I cut down the blade to say 20" for the sake of "realism?"

Obviously with small size come restrictions on what you can fit in the hilt. Can a 5.75 " hilt even fit electronics to power the LED? I know sound would be out of the option.

xwingband
08-31-2006, 01:38 PM
Sound isn't out of the realm of possibility... You'll just have to go past the norm to do it.

Yoda's in "real life" (VD saber) is 6". The CGI is 7".

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

Madcow
08-31-2006, 01:54 PM
I'd go with a 3w green LED and a single Sub C size 3.6v Lithium Ion rechargeable battery. That would all fit easily.

MC


http://rpetkau.photosite.com/~photos/tn/88_348.ts1141004694072.jpg
You want to go home and re-think your life

Grouch
08-31-2006, 02:14 PM
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by xwingband

Sound isn't out of the realm of possibility... You'll just have to go past the norm to do it.

Yoda's in "real life" (VD saber) is 6". The CGI is 7".

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Where are you getting those numbers? I've been looking all over, the best I could come up with was the .45 replica is about 3" long. so the full size should be just over 6"

xwingband
08-31-2006, 02:18 PM
The real Praco flash used to create the saber for the visual dictionary is around 6". Thay added another inch to the CGI version because they felt they could keep more detail at that size.

The easiest "source" for those numbers would be the card in the Yoda LE.

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

Mi Gin Gonn
09-01-2006, 05:04 PM
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by xwingband
Yoda's in "real life" (VD saber) is 6". The CGI is 7".
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

a VD saber? great...there's enough cooties out there as it is, now i gotta wear rubber gloves when handling a MHS too?



-------------------------

MADD - Mi's Against Drunk Dremeling

xwingband
09-01-2006, 05:09 PM
Visual Dictionary[:p]

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

Mi Gin Gonn
09-01-2006, 05:30 PM
lol, i know [:p]

just saw an obvious joke and i went for it [:D]

-------------------------

MADD - Mi's Against Drunk Dremeling