PDA

View Full Version : Need help with broken switch



mrcrazynutz
03-31-2012, 07:01 PM
I converted a 07 hasbro darth vader to led
but I broke the power switch... need a replacement!
Can someone help? Thanks!

Ka'getsu
03-31-2012, 10:37 PM
How badly did you break it? If It's not too bad, you might be able to repair it.
And just FYI it's really bad etiquette to solicit sales or trades on these forums
(if that's what you're trying to do) since it's connected to Tim's (strydur) store.

Weaver
04-01-2012, 12:51 AM
Sorry, probably overstepping my bounds, but...I actually didn't see any advertisements or solicitations in the OP. I checked for edits, too; didn't see any.

Can it be that he just wants to fix his saber?

mrcrazynutz
04-01-2012, 07:28 AM
It is not repairable... while soldering it got
too hot and broke the small board the switch
slides on... I'm asking to see where I can
get a replacement either off the shelf or if
someone else has a spare? Thanks!

Kevin Starwaster
04-02-2012, 09:39 AM
It is not repairable... while soldering it got
too hot and broke the small board the switch
slides on... I'm asking to see where I can
get a replacement either off the shelf or if
someone else has a spare? Thanks!

Does it have to be the exact same one? Perhaps one of the switches in the store could be a serviceable replacement. If it's a slide switch then it sounds like like a latching switch would do. Realizing that it's not going to look the same but it's just a thought.

cordaroyfog
04-22-2012, 11:07 AM
You just need the little switch? I have a million of them. PM me.