Darth Bejitsuto
02-06-2012, 09:57 PM
Ok i want to use this switch: http://www.thecustomsabershop.com/16mm-Anti-Vandal-Momentary-Red-Ring-Switch-P412.aspx
With this battery holder: http://www.thecustomsabershop.com/4AAA-battery-holder-P133.aspx
Which resistor should I use. Im not using any special batteries. So can someone help me figure out which one i need to get.
Vlad Doon
02-07-2012, 04:10 AM
I will answer quickly to avoid painful answers from others...:)
In the very description of the switch you have this :
4.8V would use a 150ohm 1/4 watt resistor, 6V would use a 220ohm 1/4 watt resistor
And in the description of the battery holder that :
Takes 4 standard size AAA batteries side by side to provide 6V or 4.8V (rechargeable) in a small space
So if you use alkaline batteries it would be 6v, ie 220ohm 1/4 watt resistor, and if you use rechargeable batteries, ie 4.8v, it would be 150ohm 1/4 watt resistor...Don't forget the resistor chart when you don't know which resistor to use.
Read and learn, and a great jedi you'll become, oupssss, I forgot you are an adept of the , easier, quicker dark side ;)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.