Waterdropss
01-25-2012, 11:42 AM
So I've decided to get 2 sabers at once because im making a double edged lightsaber, and decided for two diffrent colours with the Luxeon Rebel Star so
- Deep Red with 5.6 ohm 10w resistor for 6V setup and if i go with rechargable Nimh setup it's 4,8V I don't know too be honest, not too good with theese calculations because got confused with diffrent posts
- Cyan for 6V setup don't know Please tell, 4,8V setup don't know either so please tell =3
- Illuminated Light switch/"Anti-Vandal" switch for setup i understood as 220 Ohm and 1/4 W resistor for the red one
- Same but blue dont know resistor thought anyone knows ?
- Deep Red with 5.6 ohm 10w resistor for 6V setup and if i go with rechargable Nimh setup it's 4,8V I don't know too be honest, not too good with theese calculations because got confused with diffrent posts
- Cyan for 6V setup don't know Please tell, 4,8V setup don't know either so please tell =3
- Illuminated Light switch/"Anti-Vandal" switch for setup i understood as 220 Ohm and 1/4 W resistor for the red one
- Same but blue dont know resistor thought anyone knows ?