NewberL337
10-20-2011, 08:42 AM
Ok so, here is what I have for a real basic, stunt saber I hope to have built by Halloween.
NOTE: I have the pommel and choke already, it is why they are not listed.
Hilt style 4 with guarded style switch hole
Screw on LED blade holder style 18 "new style"
MHS "new style" Heat Sink
Main Body Powder Coating (Jollipop Copper Orange ) (SH42)
Blade Holder Powder Coating (Jollipop Copper Orange) (B182)
Luxeon Rebel Lens Holder
Luxeon Collimator Lens 8.7 deg viewing angle
Luxeon Rebel Star (Red-Orange)
4-40 Nylon Screw (x4)
Drill & Tap Hole (8-32)
8-32 x 3/8" aluminum thumb screw
2AA Battery holder
1.2ohm 3w resistor
SPST Latching Guarded switch with silver button
Big thanks to Cordaroyfog, Silver Serpent, MedicineMan, and Xanatos1986 for guiding me through this process!
NOTE: I have the pommel and choke already, it is why they are not listed.
Hilt style 4 with guarded style switch hole
Screw on LED blade holder style 18 "new style"
MHS "new style" Heat Sink
Main Body Powder Coating (Jollipop Copper Orange ) (SH42)
Blade Holder Powder Coating (Jollipop Copper Orange) (B182)
Luxeon Rebel Lens Holder
Luxeon Collimator Lens 8.7 deg viewing angle
Luxeon Rebel Star (Red-Orange)
4-40 Nylon Screw (x4)
Drill & Tap Hole (8-32)
8-32 x 3/8" aluminum thumb screw
2AA Battery holder
1.2ohm 3w resistor
SPST Latching Guarded switch with silver button
Big thanks to Cordaroyfog, Silver Serpent, MedicineMan, and Xanatos1986 for guiding me through this process!