PDA

View Full Version : I need some help with my first saber list. Is it complete?



nuanpi1
09-25-2011, 06:38 AM
Sledholder17 Screw on LED blade holder style 17 "new style"
NHS MHS "new style" Heat Sink
MHSadapter MHS to 1.5" sink tube adapter
8-32Vthumb 8-32 x 1/2" thumb screw
Shilt4S Hilt style 4 with standard style switch hole
MPSI12 MPS insert style 12
MPS3v2 MPS Pommel style 3 v2
Cclip MPS Clip
Qconnector 2 Wire quick connector
Coll5 Luxeon Collimator Lens 5 deg viewing angle
Corb1Battle LED "Corbin style" Battle blade 1" OD (36 inches)
Film1ThickDW ** Double Wrap (1" Thick walled, Double wrap +$3.00)
stip1Thick-R ** Standard
Colordiscs 12 Colored Discs
MRNO DPDT Momentary orange illuminated switch
PC-L Petit Crouton Sound Module
PCSD-L Light Meat (Light Meat)
ALEDD Adjustable LED driver
1/8Adhesive 1/8" Adhesive lined heatshrink tubing
2AA 2AA Battery holder
Trust14500 TrustFire Protected 3.7V 900mAh 14500 Lithium Battery (2-Pack)
P4B Seoul P4 (Blue)
8-32tap 8-32 Tap & drill set
Taphandle Tap handle

WickedWharf
09-25-2011, 07:58 AM
First off, welcome to the forums!

Just a quick scan over the list I noticed you don't have the AV hole service, Bezel for Illuminated Switch, lens holder, speaker, speaker holder, and resistors for the P4 and the switch. There might be other things that you are missing but thats all I saw at first.

Good luck with your build and make sure to post pictures after your done :D

nuanpi1
09-25-2011, 09:43 AM
Thank you for your help! I appreciate it!

Jay-gon Jinn
09-25-2011, 10:48 AM
I see you have a sinktube adapter on there...what are you using that for, if I may ask? I don't think you need that if you're using an all MHS hilt body. Also, the color discs aren't going to work with the blue P4 if that is your intention. Those work with a white P4, but even so will not be as bright as a single color led. You also do not need the adj8ustable led driver when using a Petit Crouton sound module. It has a built-in on board driver with lighting effects already.

Machinimax
09-25-2011, 11:33 AM
It seems the only thing you're missing is the thermal tape that will allow you to attach the LED to the heatsink. Also if I might make a suggestion? I saw you wanted to order a drill and tap set. Now if you want to drill and tap the saber yourself, that's up to you. I just wanted to suggest that maybe you have the service done by Tim since he offers it in the store. Since you're gonna save some
money now that you know you don't need the LED driver, it might be something you'd like to look in to. Good luck with your build!

nuanpi1
09-25-2011, 05:12 PM
Thanks everybody for the help! hopefully you will be seeing my saber soon