PDA

View Full Version : Noyl's nameless saber 2.0



Noyl Wendor
08-16-2011, 07:30 PM
Howdy, I started a new saber project. So I go back to the sketches.....
http://i1032.photobucket.com/albums/a408/noylwendor/P1000328.jpg
http://i1032.photobucket.com/albums/a408/noylwendor/P1000329.jpg
These are from way in the back of my book, trust me its a decent size book.
Got my parts Monday, by the end of the day this is what I ended up with.
I started with a 10" double female threaded extension, and a 1.25 O.D. "blank" BH from the shop. BTW the BH fits very nicely in the MHS piece.
http://i1032.photobucket.com/albums/a408/noylwendor/P1000322.jpg
http://i1032.photobucket.com/albums/a408/noylwendor/P1000321.jpg
Rough, but some filing and sand paper and I'm smiling. I do plan on some (only some) weathering.

All the parts.
http://i1032.photobucket.com/albums/a408/noylwendor/P1000323.jpg
I have a couple of MR boards, one for this one. I have'nt figured out an LED. Green P4, or Bue P4. Undecided atm.

Kai Sabol: Jedi Knight
08-17-2011, 01:51 AM
I'd go green on this one. It'd fit the style better.

Noyl Wendor
08-18-2011, 07:57 PM
Yep, I'm leaning twords green as well. Doing the wiring tonite, so I will probably figure it out then.

Noyl Wendor
08-19-2011, 10:59 PM
Well here's an update.
http://i1032.photobucket.com/albums/a408/noylwendor/P1000333.jpg
http://i1032.photobucket.com/albums/a408/noylwendor/P1000335.jpg
http://i1032.photobucket.com/albums/a408/noylwendor/P1000336.jpg
I was not real convinced on the huge switch box, but after playing around with placement some, I think it turned out pretty well.
http://i1032.photobucket.com/albums/a408/noylwendor/P1000339.jpg
I ended up with green, I have'nt done a green one in a while.
http://i1032.photobucket.com/albums/a408/noylwendor/P1000334.jpg
http://i1032.photobucket.com/albums/a408/noylwendor/P1000331.jpg