PDA

View Full Version : noob petit crouton saber



nldragon
07-10-2011, 12:01 PM
With the help of my friend(who is a member but who wishes to remain anonymous) i want to build my very first saber and i wanted to check if this partlist is alright

http://i1095.photobucket.com/albums/i476/nldragon74/SaberBuilder_render.png

7.4V lithium ion battery pack
ring style blue AV switch
LED Trans White Battle blade 1" OD (36 inches)
Luxeon Collimator Lens 8.7 deg
Luxeon Rebel Lens Holder
Luxeon Rebel Star (Blue)
Black machined button for Covertec clip
Star thermal tape pad
1" Hilt safety plug (Trans White)
MPS Pommel style 4
Hilt style 3 with guarded style switch hole
MHS choke style 1
Screw on LED blade holder style 12 "new style"
8-32 x 1/4" socket head
8-32 x .3" red thumb screw
8-32 x 3/8" Set Screw
Blade Holder Powder Coating (B121)
Pommel Powder Coating (PM41)
Main Body Powder Coating (SH33)
Premium Speaker
MHS speaker mount V2
Petit Crouton Sound Module(light meat)
Petit Crouton Sound Module SD card (Dark Meat)
Bezel for illuminated switches
SPST Momentary tactile switch
2.1mm Power Jack
MPS Clip
MPS Insert style 6
Kill plug style 2
JST connectors
3.7V-14.8V Li-Ion Smart charger

so please help me because this is my first time

Boj-Vaati Mau
07-10-2011, 01:04 PM
You'll need to get the Hilt style 3 with AV style switch hole to fit the AV switch. the Power Jack in front of your speaker may be a bit tight but it has been done, looks like about 3/4" of clearance.. You'll also have to take a bit off the Speaker mount to run your wires past it. Make sure you get the DrillTap service for your screw locations. You might want to get Chasis Discs and some threaded rod too. It looks like you have it other than those things.