View Full Version : need help with a lightsaber

07-02-2011, 10:18 AM
i have chosen a lightsaber from the website
its the last style on the page
i want to know how to build a LED light blade for my lightsaber that will withstand alot of battle.
please help email or reply
my email is

07-02-2011, 12:30 PM
Welcome. You have come to the right place to build a saber. Start Here


07-02-2011, 08:04 PM
There is a blade sold in the shop that is made for battling. Here is the link for you. :)


Now when you say you want to build the LED, does that mean you just want a saber that simply lights up or do you want one that both lights up and has sound?

07-03-2011, 08:55 AM
This saber has been built to hold an LED before, but you'll have to modify it and beef it up on the inside to hold a blade and be battle worthy.

I suggest you start reading the forums to get a basic understanding of how it will work. This is a DIY forum, and while we'll try to help you where we can, nobody is going to write up a step-by-step tutorial for you and email it to you. This is basically a sink tube saber, so start with learning about those.

From your first post, it doesn't sound like you want to do any of that, you just want to be spoon fed, that's not what we're about, here. If you show that you've done some actual research, we'll be more likely to help you more, then you can ask more specific questions and you will understand the answers better.

Building lightsabers is a journey that shouldn't be rushed, you can learn a lot during that journey, both about lightsabers, and yourself.

Good luck.

I also suggest you start looking through the many pages of the Gallery section to see who has done this before, and maybe contacting them for information.