GunbladeZero
06-30-2011, 02:21 AM
Screw on LED blade holder style 4 (http://www.thecustomsabershop.com/Screw-on-LED-blade-holder-style-4-
P247.aspx)
- Add 3/32" Allen wrench
- Drill & Tap Hole (8-32)
- Location: Top half of the blade holder between the slots. I want the blade to be sturdy so it'll be able to stand a lot of hits. If you have a better spot for the hole then by all means, go right ahead. I hope I got the right Drill tap.
MHS ribbed extension v-grooved (http://www.thecustomsabershop.com/MHS-ribbed-extension-v-grooved-P252.aspx)
Hilt style 4 with guarded style switch hole (http://www.thecustomsabershop.com/Hilt-style-4-with-guarded-style-switch-hole-P447.aspx)
- Drill & Tap Hole (8-32)
- Location: Opposite the Illuminated switch but moved down towards the pommel but is high enough to be able to slip into the covertec clip for the belt. This is for the Covertic button.
- Box 2,3,5,6 Mounting holes service
- Location: On the main body, on the area where the hole is on the picture please.
Activation box style 2 (http://www.thecustomsabershop.com/Activation-box-style-2-P355.aspx)
MPS Pommel style 3 v2 (http://www.thecustomsabershop.com/MPS-Pommel-style-3-v2-P90.aspx)
MPS Insert style 6 (http://www.thecustomsabershop.com/MPS-Insert-style-6-P263.aspx)
MPS Clip (http://www.thecustomsabershop.com/MPS-Clip--P72.aspx)
8-32 x 5/16" thumb screw (http://www.thecustomsabershop.com/8-32-x-516-thumb-screw--P73.aspx)
8-32 x 1/4" socket head (three) (http://www.thecustomsabershop.com/8-32-x-14-socket-head-P107.aspx)
1-3/16" ID Black O-ring (ten) (http://www.thecustomsabershop.com/1-316-ID-Black-O-ring--P182.aspx)
DPDT Latching green illuminated switch (http://www.thecustomsabershop.com/DPDT-Latching-green-illuminated-switch-P429.aspx)
Bezel for illuminated switches (http://www.thecustomsabershop.com/Bezel-for-illuminated-switches-P448.aspx)
Red momentary switch (http://www.thecustomsabershop.com/Red-momentary-switch-P559.aspx)
Black machined button for Covertec clip (http://www.thecustomsabershop.com/Black-machined-button-for-Covertec-clip-P116.aspx)
MHS speaker and battery holder (http://www.thecustomsabershop.com/MHS-speaker-and-battery-holder-P315.aspx)
Petit Crouton Sound Module (http://www.thecustomsabershop.com/Petit-Crouton-Sound-Module-P612.aspx)
-Light Meat
Seoul P4 (Green) (http://www.thecustomsabershop.com/Seoul-P4--P306.aspx)
Luxeon Collimator Lens 8.7 deg viewing angle (http://www.thecustomsabershop.com/Luxeon-Collimator-Lens-87-deg-viewing-angle-P537.aspx)
Seoul P4 Lens Holder (http://www.thecustomsabershop.com/Seoul-P4-Lens-Holder--P7.aspx)
LED "TCSS style" Battle blade 1" OD (36 inches) (http://www.thecustomsabershop.com/LED-TCSS-style-Battle-blade-1-OD--P155.aspx)
WIRING. All the wires are two feet long.
26 gauge wire (Black)
26 gauge wire (Blue)
26 gauge wire (Green)
26 gauge wire (Brown)
26 gauge wire (Grey)
26 gauge wire (Orange)
26 gauge wire (Purple)
26 gauge wire (Red)
26 gauge wire (White)
26 gauge wire (Yellow)
__________________________________________________ ______________________
Did I need anything else? I don't want to get everything to realize I need something.
I also need a wiring guide for how to wire the illuminated and momentary switch to the Petit Crouton Sound Module.
P247.aspx)
- Add 3/32" Allen wrench
- Drill & Tap Hole (8-32)
- Location: Top half of the blade holder between the slots. I want the blade to be sturdy so it'll be able to stand a lot of hits. If you have a better spot for the hole then by all means, go right ahead. I hope I got the right Drill tap.
MHS ribbed extension v-grooved (http://www.thecustomsabershop.com/MHS-ribbed-extension-v-grooved-P252.aspx)
Hilt style 4 with guarded style switch hole (http://www.thecustomsabershop.com/Hilt-style-4-with-guarded-style-switch-hole-P447.aspx)
- Drill & Tap Hole (8-32)
- Location: Opposite the Illuminated switch but moved down towards the pommel but is high enough to be able to slip into the covertec clip for the belt. This is for the Covertic button.
- Box 2,3,5,6 Mounting holes service
- Location: On the main body, on the area where the hole is on the picture please.
Activation box style 2 (http://www.thecustomsabershop.com/Activation-box-style-2-P355.aspx)
MPS Pommel style 3 v2 (http://www.thecustomsabershop.com/MPS-Pommel-style-3-v2-P90.aspx)
MPS Insert style 6 (http://www.thecustomsabershop.com/MPS-Insert-style-6-P263.aspx)
MPS Clip (http://www.thecustomsabershop.com/MPS-Clip--P72.aspx)
8-32 x 5/16" thumb screw (http://www.thecustomsabershop.com/8-32-x-516-thumb-screw--P73.aspx)
8-32 x 1/4" socket head (three) (http://www.thecustomsabershop.com/8-32-x-14-socket-head-P107.aspx)
1-3/16" ID Black O-ring (ten) (http://www.thecustomsabershop.com/1-316-ID-Black-O-ring--P182.aspx)
DPDT Latching green illuminated switch (http://www.thecustomsabershop.com/DPDT-Latching-green-illuminated-switch-P429.aspx)
Bezel for illuminated switches (http://www.thecustomsabershop.com/Bezel-for-illuminated-switches-P448.aspx)
Red momentary switch (http://www.thecustomsabershop.com/Red-momentary-switch-P559.aspx)
Black machined button for Covertec clip (http://www.thecustomsabershop.com/Black-machined-button-for-Covertec-clip-P116.aspx)
MHS speaker and battery holder (http://www.thecustomsabershop.com/MHS-speaker-and-battery-holder-P315.aspx)
Petit Crouton Sound Module (http://www.thecustomsabershop.com/Petit-Crouton-Sound-Module-P612.aspx)
-Light Meat
Seoul P4 (Green) (http://www.thecustomsabershop.com/Seoul-P4--P306.aspx)
Luxeon Collimator Lens 8.7 deg viewing angle (http://www.thecustomsabershop.com/Luxeon-Collimator-Lens-87-deg-viewing-angle-P537.aspx)
Seoul P4 Lens Holder (http://www.thecustomsabershop.com/Seoul-P4-Lens-Holder--P7.aspx)
LED "TCSS style" Battle blade 1" OD (36 inches) (http://www.thecustomsabershop.com/LED-TCSS-style-Battle-blade-1-OD--P155.aspx)
WIRING. All the wires are two feet long.
26 gauge wire (Black)
26 gauge wire (Blue)
26 gauge wire (Green)
26 gauge wire (Brown)
26 gauge wire (Grey)
26 gauge wire (Orange)
26 gauge wire (Purple)
26 gauge wire (Red)
26 gauge wire (White)
26 gauge wire (Yellow)
__________________________________________________ ______________________
Did I need anything else? I don't want to get everything to realize I need something.
I also need a wiring guide for how to wire the illuminated and momentary switch to the Petit Crouton Sound Module.