Darth Odious
06-22-2011, 04:11 PM
Got a new design I'm planning on, when money permits, here is my design and parts list:
http://farm6.static.flickr.com/5105/5861178051_703e9e0986_z.jpg
TrustFire Protected 3.7V 2400mAh 18650 Lithium Battery (x2)
2.1mm Power Jack
Premium Speaker
MHS speaker mount V3
Petit Crouton Sound Module
Box Style 2 (currently out of stock)
Nickle Plated Momentary Switch (Already Have)
Black momentary switch
Luxeon Rebel Star (Green)
Luxeon Collimator Lens 8.7 deg viewing angle
Luxeon Rebel Lens Holder
MPS Pommel style 10
MPS Insert style 1
MPS Clip
4" Double female threaded connector (Modified with 5 grooves)
MHS ribbed extension (With Activation box cutouts)
MHS Gear
Screw on LED blade holder style 10 "new style"
Kill plug style 2
Black machined button for Covertec clip
Anything missing? The PCB is currently out of stock, I've never made my own battery pack, I've always scavenged them out of other things, Do I need a PCB with protected batteries?
The Box 2 will be placed on the ribbed ext.
EDIT:
http://farm6.static.flickr.com/5110/5861891976_e71cd3a5d1.jpg
I used another wiring diagram and modified it, even though it shows an older PC, the principal is that same, is it not? would this be the correct way to wire the PC? No accent LED's, Just going for simple on this.
http://farm6.static.flickr.com/5105/5861178051_703e9e0986_z.jpg
TrustFire Protected 3.7V 2400mAh 18650 Lithium Battery (x2)
2.1mm Power Jack
Premium Speaker
MHS speaker mount V3
Petit Crouton Sound Module
Box Style 2 (currently out of stock)
Nickle Plated Momentary Switch (Already Have)
Black momentary switch
Luxeon Rebel Star (Green)
Luxeon Collimator Lens 8.7 deg viewing angle
Luxeon Rebel Lens Holder
MPS Pommel style 10
MPS Insert style 1
MPS Clip
4" Double female threaded connector (Modified with 5 grooves)
MHS ribbed extension (With Activation box cutouts)
MHS Gear
Screw on LED blade holder style 10 "new style"
Kill plug style 2
Black machined button for Covertec clip
Anything missing? The PCB is currently out of stock, I've never made my own battery pack, I've always scavenged them out of other things, Do I need a PCB with protected batteries?
The Box 2 will be placed on the ribbed ext.
EDIT:
http://farm6.static.flickr.com/5110/5861891976_e71cd3a5d1.jpg
I used another wiring diagram and modified it, even though it shows an older PC, the principal is that same, is it not? would this be the correct way to wire the PC? No accent LED's, Just going for simple on this.