PDA

View Full Version : question about mace conversion service



alphamale
08-05-2006, 10:58 AM
When you click on the "view link", at the end of the description it says: "See the complete LED blade listing for a much stronger blade that will work with this conversion."

If I send in my MR mace to get converted, do I have the option of getting a stronger "tim blade" as opposed to the stock MR blade? And how much extra does it cost? Or does the conversion already include a new blade? Also there is no blade length option for the conversion service. Can I just give you a note when I send it in?

thank you!

Lord Maul
08-05-2006, 01:16 PM
i think that you buy the blade seperate for 29.99

At last we will reveal ourselves to the jedi, at last we will have revenge.

xwingband
08-05-2006, 01:19 PM
You have to order a complete blade SEPERATE of the conversion. Tim made the holder so that you could reuse the MR blade if you put a bit of tape OR use a 1" PolyC blade if you sand it.

If you don't buy the stronger complete blade he will just send you back the stock one, thus no need for a blade length option. As for the cost... look it up. LED Products -> Complete Blades

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

alphamale
08-06-2006, 07:49 AM
Thanx for the info fellas. I was wondering if Tim could sand down the blade for me and send me the saber with the 29 dollar blade attached. He can keep my stock blade if he wants.

Lord Maul
08-06-2006, 09:33 AM
you should pm or email him that question [;)]

At last we will reveal ourselves to the jedi, at last we will have revenge.

Strydur
08-06-2006, 10:49 PM
There would be no need to sand down a blade bought from me. All of the holders are designed to fit my blades.

Tim
The Custom Saber Shop

xwingband
08-07-2006, 06:33 AM
Oh yeah, that's because the older blade were slightly different in size, correct?

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

Strydur
08-07-2006, 09:48 AM
Thats correct

Tim
The Custom Saber Shop

alphamale
08-08-2006, 11:55 AM
cool, thanx.

Lord Maul
08-08-2006, 01:59 PM
you bet [;)]

At last we will reveal ourselves to the jedi, at last we will have revenge.