Fsutamu
05-20-2011, 12:54 PM
First off thanks for taking a look. Have read through the forums and hopefully (probably not) have everything.
Here is the list:
7" Fluted with guarded style switch hole
MPS Pommel style 3 v2
MPS insert style 12
MHS choke style 2
Screw on LED blade holder style 18 "new style"
Drill & Tap Hole (8-32) (Blade retention screw)
Activation box style 9
Box 9 Mounting holes service (Opposite side from existing Switch Hole)
DPDT Latching blue illuminated switch (Saber activation)
2.1mm Power Jack (Charging port Mounted in Activation Box)
Kill plug style 2
DPDT Momentary blue illuminated switch (Aux Mounted in existing hilt Switch hole)
Petit Crouton Sound Module
Petit Crouton Sound Module SD card (Light Meat)
Luxeon Rebel Star (Royal Blue)
Luxeon Rebel Lens Holder
Luxeon Collimator Lens 8.7 deg viewing angle
BuckPuck 700mA 4-wire
6AA Battery Holder
Premium 9V connector
AA 2600mAh NiMH Rechargeable battery
Premium Speaker
MHS speaker mount V3
LED "TCSS style" Battle blade 1" OD (36 inches)
Main Body Powder Coating (DFS2)
Blade Holder Powder Coating (B182)
Pommel Powder Coating (PM31)
26 gauge wire
1/8" Adhesive lined heatshrink tubing
JST connectors
Thanks again for taking the time to look at the list.
Here is the list:
7" Fluted with guarded style switch hole
MPS Pommel style 3 v2
MPS insert style 12
MHS choke style 2
Screw on LED blade holder style 18 "new style"
Drill & Tap Hole (8-32) (Blade retention screw)
Activation box style 9
Box 9 Mounting holes service (Opposite side from existing Switch Hole)
DPDT Latching blue illuminated switch (Saber activation)
2.1mm Power Jack (Charging port Mounted in Activation Box)
Kill plug style 2
DPDT Momentary blue illuminated switch (Aux Mounted in existing hilt Switch hole)
Petit Crouton Sound Module
Petit Crouton Sound Module SD card (Light Meat)
Luxeon Rebel Star (Royal Blue)
Luxeon Rebel Lens Holder
Luxeon Collimator Lens 8.7 deg viewing angle
BuckPuck 700mA 4-wire
6AA Battery Holder
Premium 9V connector
AA 2600mAh NiMH Rechargeable battery
Premium Speaker
MHS speaker mount V3
LED "TCSS style" Battle blade 1" OD (36 inches)
Main Body Powder Coating (DFS2)
Blade Holder Powder Coating (B182)
Pommel Powder Coating (PM31)
26 gauge wire
1/8" Adhesive lined heatshrink tubing
JST connectors
Thanks again for taking the time to look at the list.