View Full Version : Scratches on the PolyC
luis rojas
08-01-2006, 06:25 AM
Hi guys: recently, I was playing with my cat (who secret identity is Darth Meaowl a sith lord) and during the fight the PolyC blade of my saber got some scratches on it. My little brain [:I] thought that sandpaper would help and it did but it also add an undesirable[xx(] "frost" look to the blade. What can I do to get the clear look that it had at the begining? Does anybody has a anti-age potion for it?
Please help...[V]
http://www.subir-imagenes.com/subir_imagen/c40df02d12.gif
HiddenMooCow
08-01-2006, 06:49 AM
Hmm, maybe being very careful with some ultra clear wax and it has to be completely see-through. Then maybe you could take that and slowly go up and down the blade filling up the scratches and holes with the wax. Maybe it'll work maybe not, just a thought.
Do-Clo
08-01-2006, 07:14 AM
You can use some 1000 or 2000 grit sandpaper to further smooth the area then try some Novus #2 plastic polish and it should restore the shine, you can also apply some liquid auto wax for clear coat paint and wax the entire blade to get a uniform shine.
<center>http://i48.photobucket.com/albums/f217/Do-Clo/DoCloSig.jpg</center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Darth Technous Sith Lord</font id="Comic Sans MS"></font id="size4"></font id="red"></center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Give yourself to the Dark Side</font id="Comic Sans MS"></font id="size4"></font id="red"></center>
luis rojas
08-02-2006, 03:03 PM
Thank you guys. Today I will visit the hardware store and make some work in the night. I will keep you update. Thanks again
http://www.subir-imagenes.com/subir_imagen/c40df02d12.gif
HiddenMooCow
08-02-2006, 03:58 PM
No problem, that's what were here for.
McAllister
08-03-2006, 07:34 PM
Just a suggestion I've seen modelers do to jet canopies. Future Floor Wax.
JediSaberSmith
08-03-2006, 08:54 PM
Yeah if you sand the scratches out and use either plastic or Plexi polish it will look good as new.
JediSaberSmith
An Elegant Weapon From A More Civilized Age
www.jedisabersmith.com
luis rojas
08-09-2006, 10:17 AM
Thank you guys as soon as I get the polish I will put some pictures of how it gets. Thanks
http://www.subir-imagenes.com/subir_imagen/c40df02d12.gif
HiddenMooCow
08-09-2006, 02:00 PM
I can hardly wait to see em! [:)]
Drewbacca
08-11-2006, 10:29 PM
Friend of mine and I were dueling behind where I work after I got off (yea he's odd...) anyway, he dropped his damn saber and it's got scratches now. Think the 1k or 2k grit paper and plexi polish will clear that up?
________________________________
"That's 'cause droids don't pull people's arms out of their sockets when they lose. Wookiees are known to do that."
987654321a
08-11-2006, 10:32 PM
how bad and big are the scratches?
I DONT KNOW WHAT WE'RE YELLING ABOUT!!....LOUD NOISES!!!
www.starwarscustoms.bravehost.com http://img430.imageshack.us/img430/9995/sithlord6jk8cr.png
Drewbacca
08-11-2006, 11:59 PM
Mostly small ones...almost like "dents" or "chips". As though he dropped it on some very small, and sharp, rocks.
________________________________
"That's 'cause droids don't pull people's arms out of their sockets when they lose. Wookiees are known to do that."
Do-Clo
08-12-2006, 05:20 AM
You will be able to sand most of it if not all of it out, then use a good plastic polish and it should good again.
<center>http://i48.photobucket.com/albums/f217/Do-Clo/DoCloSig.jpg</center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Darth Technous Sith Lord</font id="Comic Sans MS"></font id="size4"></font id="red"></center>
<center><font color="red"><font size="4"><font face="Comic Sans MS">Give yourself to the Dark Side</font id="Comic Sans MS"></font id="size4"></font id="red"></center>
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.