sound help to keep from moving

[Gregorybear1986]

I belive this is the right place seening how it deals with the boards. I have searched and searched for pics and Ideas but I need some pics. How do I keep my internals from moving. please help.

[Rafalema]

Attach the board on top of your battery pack and secure the battery pack using MPS Speaker holder.

Other than that, heatshrink the board, and improvise.

Good luck.

[cardcollector]

I use a washer and rod setup the majority of the time. Unless I dont have space...

This chasis is made using Nylon washers, nuts, and spacers I found at ACE. It took about two hours to make.
https://lh3.googleusercontent.com/_NEn2MDL_Y8E/TXuQsaXGZSI/AAAAAAAAAjA/S-Zr62Fw0i4/s720/DSCN2177.JPG

The board is heatshrunk to the chasis after all wiring is tested and routed...
https://lh6.googleusercontent.com/_NEn2MDL_Y8E/TXuQxABGTjI/AAAAAAAAAjM/IIAE6n0biEU/s720/DSCN2180.JPG

Hope that helped some...