Master Replicas/Hasbro Conversion kit blade OD?

[Ballistic Jello]

Pretty much what the title says. I have a 2005 MR Anakin (empty hilt with no blade or electronics from eBay)that I want to convert to a Rebel LED setup with Tim's conversion kit. I found only one thread in the forum that says the MR blades were 1" OD. I just want to confirm that it is a 1" blade tube I should order to fit the Anakin conversion kit.

Thanks in advance!

Just a suggestion, but it may be a good idea to specify what blade OD will fit the MR conversion kits on the store site. (The Yoda kit says it holds the 1" OD blades, but I have no idea if all the kits are the same in that respect...)

[jin starkiller]

all kits will hold a 1" blade

[Skottsaber]

All the conversion kits are for standard 1" blades.
Not all MR/Hasbro FX blades are 1" though, so be careful.

[Ballistic Jello]

Thanks for the quick responses guys. I would hate to order the wrong size blade. I think I am going to hold off on this conversion for right now and concentrate on building Debris. This is going to be the most complex saber I have built yet. But when I get to the Anakin conversion I'll be good to go...Thanks again!