Thread size for accessory momentary switches?

[cannibal869]

Hi all,

Just wondering if anyone has an idea what the thread size is for the black (or red) accessory momentary switches that are available in the store here:

http://www.thecustomsabershop.com/Black-momentary-switch-P558.aspx

http://www.thecustomsabershop.com/Assets/ProductImages/switch20.jpg

I *think* it's a size 10, but the thread size seems to be smaller than 32 (i.e. tighter "threads" than 10-32)

Thanks in advance!
-C

[IndustrialAction]

M5x.5 (HERE (http://forums.thecustomsabershop.com/showthread.php?11154-Commonly-used-Drill-bits-taps-and-measurements&p=183035#post183035))

[cannibal869]

ahh thanks - couldn't find that thread

[Azmaria Dei]

i had to track it down earlier. turns out it's in the last post on that thread too, so even if someone reads the all important first post or three since it's stickied, they'll still miss it. can a Mod add it to the first post please? 'twould be easier methinks...

[Jedi-Loreen]

can a Mod add it to the first post please? 'twould be easier methinks...
Done!

[cardcollector]

i had to track it down earlier. turns out it's in the last post on that thread too, so even if someone reads the all important first post or three since it's stickied, they'll still miss it. can a Mod add it to the first post please? 'twould be easier methinks...

Woops, sorry guys... I missed that one... :(

[jin starkiller]

Its all good CC... I was also looking for the thread size myself

[Jedi-Loreen]

Ok, this thread has served its purpose.