TerennKinobi
02-26-2011, 05:48 PM
-Hilt Style 4 (guarded hole)
-MHS Choke Style 2
-MPS pommel Style 3 v1
-MPS Insert style 6
-Screw on LED blade holder Style 12
-10 Black O-rings
-Black machined button for covertec clip
-8-32 x 1/4" socket head (for covertec button)
-8-32 x 5/16" thumb screw
-Drill & Tap Hole (8-32) x2 (for covertec button and blade holder)
-LED "TCSS style" Show Blade 1" OD (36 inches)
-1/8" Heatshrink tubing
-4AAA battery holder
-BuckPuck 1000mA 6-wire
-Luxeon Rebel Star (Amber)
-Luxeon Rebel Lens Holder
-Luxeon Collimator Lens 8.7 deg viewing angle
-Heat Sink shim for Rebel stars
-SPST Latching Guarded switch with red button
Besides soldering the electronics and assembling the hilt, there is nothing else I need to do, correct? As in, there's no other holes i need to drill or anything because I included the drill and tap services.
Also, I keep seeing 'buckpuck' being mentioned here and there. Is there any need for me to get a buckpuck?
-MHS Choke Style 2
-MPS pommel Style 3 v1
-MPS Insert style 6
-Screw on LED blade holder Style 12
-10 Black O-rings
-Black machined button for covertec clip
-8-32 x 1/4" socket head (for covertec button)
-8-32 x 5/16" thumb screw
-Drill & Tap Hole (8-32) x2 (for covertec button and blade holder)
-LED "TCSS style" Show Blade 1" OD (36 inches)
-1/8" Heatshrink tubing
-4AAA battery holder
-BuckPuck 1000mA 6-wire
-Luxeon Rebel Star (Amber)
-Luxeon Rebel Lens Holder
-Luxeon Collimator Lens 8.7 deg viewing angle
-Heat Sink shim for Rebel stars
-SPST Latching Guarded switch with red button
Besides soldering the electronics and assembling the hilt, there is nothing else I need to do, correct? As in, there's no other holes i need to drill or anything because I included the drill and tap services.
Also, I keep seeing 'buckpuck' being mentioned here and there. Is there any need for me to get a buckpuck?