Parts for saber fix

[jedimastergarcia87]

Heres my parts list:

Green, yellow led indicator or accents whatever you call them
Black machined covertech knob
The new grip style 1
Battery charger and battery pack, 3.7V 900mAH 14500 Lithiums
2.1mm power jack
Black mom switch with the meta housing
Trans white PolyC batte blade with bullet tip

Am I missing anything else? All this will be for my US2.5 MHS saber. Can I use the selected rechargable batteries for the US2.5 board? Its the board plus a blue LUXIII led plus the two added accent leds in the list. Anyway, thanks for the info. If I need help wiring the recharge port to the saber I'll ask. I never wired a recharge port or accent leds before.

[Azmaria Dei]

you'll need the right PCB for the batteries. if you wire them in series you'll need to remove both built in PCBs and wire a 7.4V PCB. if you wire them in parallel for 3.7V you can remove one and wire them both to the remaining one.

[Skottsaber]

You cannot use 7.4v with US 2.5. It will overheat and may kill your board.
I recommend 4.8v using NIMH.

[jedimastergarcia87]

Ok @Skott. Thanks for the heads up. I will look for those then.