face palm
02-16-2011, 11:25 PM
Hey guys just wanting to check up if i have everything i need for the inner electronics part of my build. Any objection or criticism is greatly appreciated, as i DO NOT want to screw things up when it comes to actually getting to this part of the build.
LED
--> Green 10W LedEngin (4 addressable dies -> GGGG), 700 mA, 16.8V total with every die in the series, 7mm x 7mm x 4.3mm, Thermals and Optics are taken care of in the design
more info: http://www.ledengin.com/products/10wLZ/LZ4-00G110.pdf
Sound
--> 2010 Obi-Wan Kenobi Economy Soundboard (lightsaber comes with a free DVD)(Motion and Clash Sensors Included)
-->Premium Speakers (TCSS)
Switch
--> DP3T Slide Switch (mid position acts as momentary, distill position latching)
Power/Misc.
--> 4AA Battery Holder
-->2 Feet of Dual 18 Gauge Wire
-->1 Foot of 3/32" Heatshrink Tubing
Blade
--> LED "Corbin Style" Battle Blade 1" OD x 34" length, Bullet Tip
As most of you can already tell, this set up is similar to cannibal's Spartan build from a few months back, so i have to give him major props for the inspiration. Green also just happens to be my favorite color as well :cool:
I'm not putting the hilt parts in here because the specifics aren't necessary, but here are the hilt dimensions: 1.5" OD x 1.25 ID x 11.86" length, so your standard MHS build.
Like i said, any help/objection/criticism is wanted/most likely needed. Thanks for reading through this. I'm pretty excited about joining the forum community and getting this project made!!
LED
--> Green 10W LedEngin (4 addressable dies -> GGGG), 700 mA, 16.8V total with every die in the series, 7mm x 7mm x 4.3mm, Thermals and Optics are taken care of in the design
more info: http://www.ledengin.com/products/10wLZ/LZ4-00G110.pdf
Sound
--> 2010 Obi-Wan Kenobi Economy Soundboard (lightsaber comes with a free DVD)(Motion and Clash Sensors Included)
-->Premium Speakers (TCSS)
Switch
--> DP3T Slide Switch (mid position acts as momentary, distill position latching)
Power/Misc.
--> 4AA Battery Holder
-->2 Feet of Dual 18 Gauge Wire
-->1 Foot of 3/32" Heatshrink Tubing
Blade
--> LED "Corbin Style" Battle Blade 1" OD x 34" length, Bullet Tip
As most of you can already tell, this set up is similar to cannibal's Spartan build from a few months back, so i have to give him major props for the inspiration. Green also just happens to be my favorite color as well :cool:
I'm not putting the hilt parts in here because the specifics aren't necessary, but here are the hilt dimensions: 1.5" OD x 1.25 ID x 11.86" length, so your standard MHS build.
Like i said, any help/objection/criticism is wanted/most likely needed. Thanks for reading through this. I'm pretty excited about joining the forum community and getting this project made!!