Darth Midian
02-16-2011, 10:35 AM
I was contacted by a woman on Facebook who is going to Mega-Con. One her costumes is a Sith Cheerleader. She had ask me if I could build hilts for her floggers. I told her as long as the handles are the right size it shouldn't be a problem. The handles are 3/4". They were perfect.
1st I had to remove the braids from the handles.
http://i866.photobucket.com/albums/ab227/DMidian/SF1.jpg
The handles fit perfectly inside some scrap 1" thick walled blade stock.
http://i866.photobucket.com/albums/ab227/DMidian/SF2.jpg
Then I slid the flogger/bladestock set up inside 1" pvc.
http://i866.photobucket.com/albums/ab227/DMidian/SF3.jpg
All the hilt parts cut shaped & sanded.
http://i866.photobucket.com/albums/ab227/DMidian/SF4-1.jpg
All the parts painted.
http://i866.photobucket.com/albums/ab227/DMidian/SF5-1.jpg
Finished product. Sith Floggers. :D
http://i866.photobucket.com/albums/ab227/DMidian/SF6.jpg
http://i866.photobucket.com/albums/ab227/DMidian/SF7.jpg
http://i866.photobucket.com/albums/ab227/DMidian/SF8.jpg
http://i866.photobucket.com/albums/ab227/DMidian/SF9.jpg
1st I had to remove the braids from the handles.
http://i866.photobucket.com/albums/ab227/DMidian/SF1.jpg
The handles fit perfectly inside some scrap 1" thick walled blade stock.
http://i866.photobucket.com/albums/ab227/DMidian/SF2.jpg
Then I slid the flogger/bladestock set up inside 1" pvc.
http://i866.photobucket.com/albums/ab227/DMidian/SF3.jpg
All the hilt parts cut shaped & sanded.
http://i866.photobucket.com/albums/ab227/DMidian/SF4-1.jpg
All the parts painted.
http://i866.photobucket.com/albums/ab227/DMidian/SF5-1.jpg
Finished product. Sith Floggers. :D
http://i866.photobucket.com/albums/ab227/DMidian/SF6.jpg
http://i866.photobucket.com/albums/ab227/DMidian/SF7.jpg
http://i866.photobucket.com/albums/ab227/DMidian/SF8.jpg
http://i866.photobucket.com/albums/ab227/DMidian/SF9.jpg