PDA

View Full Version : battery/speaker combo wiring



Darth
12-03-2010, 10:13 AM
Hi everyone just wondering what to do with the green and blue wires on the 4AAA battery & speaker combo. How do they hook up to an MR board?

Skottsaber
12-03-2010, 10:55 AM
Blue and green are the speaker wires.
There are a ton of FX board wiring diagrams.

Jay-gon Jinn
12-04-2010, 12:28 PM
Hook the green wire up to the red one from the battery pack and the red wire from the MR board. The black wire from the pack goes to the black wire from the MR board, and the blue wire goes to the brown one. The other two wires on the MR board, usually either yellow or blue depending on the version of board you have, are the switch wires.

Wiring diagrams for most of the MR boards are in the topics stickied at the top of this section.