Sinktube & it's Fit to MHS Parts

[captain_mills]

I'd like to place some sinktube parts over the top of some MHS parts, namely the LED Blade Holder 1 and the MHS Choke 3 as a joiner and for style effect. My question is, how well do the sink tubes fit to the MHS parts?

(1) Loosely, without screws it will fall off when you tip it.
(2) Tightly, once you put it on there, you ain't getting it off.
(3) Snugly, like a man and a woman meant to be together.

Thanks for your help!
Captain Mills

[cannibal869]

I would say if you buy the sinktube from the store, it's more like in between #1 and #3. It WILL slide off if you don't secure it somehow though, but in general, the fit is fairly close.

Now if you get sinktube from elsewhere it's a little variable depending on what gauge you get.

[Skottsaber]

Not many people know, but the MHS was designed to have a sinktube slide over perfectly.
Rest assured, it will work fine ;)

[equinox13]

and noone ever said this anywhere else in the forums? O.o crazy... most sinktube is chromed brass though, isn't it?

[Crystal Chambers]

And don't forget inside it! 1.25" sinktube fits just as well inside standard MHS ID.

[Skottsaber]

That I also did not know.
Underlay, anyone?

[Jay-gon Jinn]

That I also did not know.
Underlay, anyone?

Been there, done that. ;)

[captain_mills]

Awesome, you guys, thanks for the help. I wasn't aware about the inside diameter for the 1.25" sinktube... Cool!