Treach
11-06-2010, 03:58 PM
Well, here's the MKI for what I've been calling the 'Crusader'.
There's a bit more work to do, and I'm on the fence for any accent LEDs, but its quite functional.
It's a 'Hilt-Forward' design with a resistor driven Amber LuxIII fore, and an Obi-wan hasbro with twin motions and faced-speakers aft. They operate on a 4.5v 3xAAA, with a miniature SPST for the LED and a generic mini momentary for the soundboard.
The hilt is a single leather wrap over a sinktube, the seam is visible in the photos, but just barely irl. The Copper accents used to be a 1 1/2- 1 1/4 adapter.
Weathering was done with a high-speed wirewheel, and the sinktube is painted with a mix of clear semi-gloss enamel and black ink.
Parts:
5" Extension
2" Extension
Short Choke
BH type 15
MPS 4
Heres some close-ups in my gallery till I can get the re-sizes finished (http://s1180.photobucket.com/albums/x407/GFpagano/?action=view¤t=10.jpg&newest=1).
Thanks for looking.
-T
There's a bit more work to do, and I'm on the fence for any accent LEDs, but its quite functional.
It's a 'Hilt-Forward' design with a resistor driven Amber LuxIII fore, and an Obi-wan hasbro with twin motions and faced-speakers aft. They operate on a 4.5v 3xAAA, with a miniature SPST for the LED and a generic mini momentary for the soundboard.
The hilt is a single leather wrap over a sinktube, the seam is visible in the photos, but just barely irl. The Copper accents used to be a 1 1/2- 1 1/4 adapter.
Weathering was done with a high-speed wirewheel, and the sinktube is painted with a mix of clear semi-gloss enamel and black ink.
Parts:
5" Extension
2" Extension
Short Choke
BH type 15
MPS 4
Heres some close-ups in my gallery till I can get the re-sizes finished (http://s1180.photobucket.com/albums/x407/GFpagano/?action=view¤t=10.jpg&newest=1).
Thanks for looking.
-T