PDA

View Full Version : Add on board issue



mongo
11-05-2010, 04:26 PM
Hello everyone:D
i wanted to start this thread about hooking up and using the add on board.
I know there's a thread for board and schematic,but nothing on the actual usage,or experience with.If this falls under that thread ,than i apologize please move it if not ROLL ON.

Here's my ?
I have the sound card and LED adj driver+add on,with a DPST mom switch
when i press the switch the LED comes on but then it resets my sound card to stand by and sometimes it does it when i first fire it up throwing it all out of whack.
I am using a 7.2v AAA batt pack-the adj driver+add on is set @1000ma to a Ledengin 10w {2 green dies}in series the {HYP...the soundcard that shall not be named}:rolleyes:.
here's my diagram hookup picture
http://s793.photobucket.com/albums/yy212/mongo777/?action=view&current=helpwire.jpg
any ideas would be great
thanks

Darth Xusia
11-05-2010, 05:16 PM
Which switch are you using?

mongo
11-05-2010, 05:33 PM
TCSS AV switch dpst momentary

Darth Xusia
11-05-2010, 08:30 PM
I am not familiar with that board but maybe it has a switch bounce issue like the US 2.0 had. Just a thought.