View Full Version : Question about yoda sound board
jin starkiller
10-19-2010, 04:36 PM
I have the 2010 hasbro with dvd yoda sound board and cant seem to understand where the switch wires go since it didn't have any on the board or anything else for that matter connected to power it up ...thanx
jjshumpert
10-19-2010, 06:01 PM
if you look closely at the board all the required connections are labeled beside the pads
jin starkiller
10-19-2010, 07:28 PM
i looked at the board and saw only a label for sw1 and a lot of other traces just unsure of where the other wire needs to be soldered is all
equinox13
10-20-2010, 03:06 AM
i've pointed out where i put my switch wiring in this post with a picture for the yoda board i used. a lot of labels are on the back side. as for wiring the switch, the contacts for both ends are in the switch pad and the contact of the button material bridging them is the rest of the switch.
http://forums.thecustomsabershop.com/showthread.php?p=183447#post183447
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.