Asoka Tano

[narod]

Does any one out there know of a template that i can use to cut out Asoka Tano light saber
Thanks:p

[Arkhan]

I don't off the top of my head, but I would be suprised if a google search didn't come up with something.

[cardcollector]

Simple.

Make one. It shouldn't be to hard.

[cannibal869]

Ditto that...

worst case scenario - take two luke templates and combine them to create something similar to the ahsoka (at least that's what I did...) ;)

[Rhyen Skytracker]

I used a digital caliper to measure 5 points down each side and then drew a straight line with a metal ruler and then cut it with a dremel. Now that I have a mill, it will be much easier to do my next one. Here is the one I made with a dremel. http://forums.thecustomsabershop.com/showthread.php?t=7608