PDA

View Full Version : difference between 4.2 &4.3



dj2rbo
08-31-2010, 02:37 PM
Does anyone know the difference? And feel free to burn me if this is astupid newbie question. Thanks.

Darth Xusia
08-31-2010, 03:01 PM
The difference is .1
J/K I know that someone had an issue with a red led on the 4.2 but I don't know what it was exactly.

FenderBender
08-31-2010, 06:23 PM
Yeah, not too many (if any) true 4.2's made it out to the public. There was an issue with the flicker on start up affecting the vf of red LEDs (IIRC, don't kill me Erv' if I'm wrong:D). The issue was caught by Madcow and the firmware was fixed immediately.

dj2rbo
08-31-2010, 07:43 PM
well thank you for that sir. hehehe now off to do some pocket stuffing.......

Novastar
09-01-2010, 03:54 PM
Yup... Fender is pretty much correct. The problem is/was actually pretty minor, and only affected people under certain circumstances--mainly (if I recall) when you were using extremely short poweron sounds and/or something like whether you used "instant on" (qon) or not.

It should be of little concern to MOST people... although if you have a v4.2 board, it's a good idea to have it upgraded.

xl97
09-01-2010, 03:56 PM
although if you have a v4.2 board, it's a good idea to have it upgraded.


I was just going to chime in and say that as well..

Erv will take care of you.. you wont have any complaints.

but as stated it only affects a small portion of the small sect of red led users I believe..