Astra

[Picky]

Here there is my white lightsaber, I called it astra because the luxV lights the saber as a star!
Description:
MHS Blade Holder style 3
MHS Choke style 2
MHS Choke style 1 short (for the Obi-Wan epI style pommel)
MHS Ribbed Extension
2" Extension
Standard Style Latching switch
Resistor
9V battery (I know it is not efficient, but I'm not expert and I didn't want to use the powerfull Li-Ion batteries, and there was really little space in this hilt, I have to change the battery from the Choke!)
LuxV white 280 lumen

Maybe I will paint:
The ribbed section with black grooves,
Gold style 2 Choke,
Bronze 2" Extension,
Black style 1 short Choke.

I hope you will like this!

http://img823.imageshack.us/i/armony1.jpg/
http://img291.imageshack.us/i/armony2.jpg/
http://img828.imageshack.us/i/armony3.jpg/
http://img130.imageshack.us/i/armony4.jpg/

[Jin Ke]

Nice use of parts... I like how everything flows together... That's a really bright white! :)

[RevengeoftheSeth]

Really cool look. It looks like your blade could move from one side to the other! ;)

On a side note, how come some people position their hilts between two MR stands? Does it not fit correctly on one?

[Picky]

How come some people position their hilts between two MR stands? Does it not fit correctly on one?
This hilt is too short to fit on one.

Thank you all!

[Lord Dottore Matto]

This hilt is too short to fit on one.

Thank you all!

Blade plug/shorty display blade bro ;)

Nice saber btw.

[RevengeoftheSeth]

Aha! I see, now. I don't have one of those stands, yet, so I wasn't sure what the issue with them is.

[Jay-gon Jinn]

Nice use of that choke as part of the pommel....almost looks a bit Obi-wan TPM-ish...sorta....;)

[Treadingwolf]

This turned out very well.
Like some of the others i have to say you made excellent use of those parts. :)

[Crystal Chambers]

Nice! I like the use of chokes too. I'm sure it will look even better with some paint/weathering. It's worth taking the time at this stage to consider several options.

You could easily fit 4AAA nimh in the ribbed section I believe...unless I'm missing something.

[Picky]

You could easily fit 4AAA nimh in the ribbed section I believe

Yes, the space is totally enough, but 4AAA are not enough (sorry for the pun - is that the right word?) for the LuxV, it requires 7.5V at 750mA, and 4AAA give 6V.

LDM, the idea of the short blade is really good :), maybe in the next order I will buy a Thin walled Trans White blade to cut at 15 - 20 cm (I think 6" - 8").

Thank you all!

[RevengeoftheSeth]

It's even worse than that, 4AAA NiMH is only 4.8V :(