PDA

View Full Version : possible to convert Larbel hilt to Luxeon LED?



Chowser
12-03-2005, 04:15 PM
I have had a Larbel Obi-Wan TPM converted over to EL,

is it possible to convert my spare Larbel Obi-Wan TPM into an LED version and possibly stick a sound board from an FX into it?

I guess I should try taking apart the Larbel and see.

Strydur
12-03-2005, 04:24 PM
Its possible to do allot of things..but unless someone has done one before its hard to say how easy it will be.

Tim
The Custom Saber Shop

Meridian
12-15-2005, 10:00 PM
The problem here is battery room.
If a Luxeon can run on a 9volt then you could convert it though the fit
will be very tight.

As far as a MR sound board, it might fit but again...
getting enought power from a 9volt to get it all to fit in there.

Or maybe a custom Litium battery for fitting this narrow hilt, but the
top shold have room to fit, a very "custom" time consuming set up.

GeluKhanGharr
12-16-2005, 03:31 AM
a 9 volt battery can be used for any voltage requirement bellow that with the appropriate Zener Diode. Look into it.

Born of Sith, seduced by the light.
http://www.saloncatalina.com/images/signature.jpg