PDA

View Full Version : Wiring Labels



RevengeoftheSeth
08-23-2010, 05:41 PM
I am rewiring my 2010 Hasbro Obi-Wan cheapo board with all new wiring (because the stock wiring is, well, crap). Does anyone have any good tips for wire labelling that I can use to keep it all straight? I've only got two colors of wiring.

EDIT: Also, if anyone has a close up picture of their Obi-Wan board so I can see the leads/colors I would REALLY appreciate it. I especially need to see which lead is which on the swing sensor (mine pulled off the actual sensor during a cram-fu).

Skottsaber
08-24-2010, 10:28 AM
I would suggest using a bit of masking tape folded in half around the wire, and then you can write on it.

Arkhan
08-24-2010, 10:31 AM
ptouch label maker

Jedi-Loreen
08-24-2010, 10:43 AM
A swing sensor is really just a type of switch. It has no polarity.

RevengeoftheSeth
08-24-2010, 08:03 PM
P-touch is a good idea. I might use that.

Thanks all.