PDA

View Full Version : My Revised (Again) Saber



Jedi_Knight_Zekk
08-12-2010, 06:12 AM
I am building a Saber for my character, Darius Malakoth.
SPECS:
Seoul P4 Blue LED/P4 kit
Blade Holder Style 18
10-32 x13/32" thumb screw
Hilt Style 1 Standard Switch Hole
MPS Pommel Style 3v2
MPS Insert Style 4

Still no blade decided, but I also have the 10-32 tap set, 2 sets of 26 guage wire, and looking for a tap handle and C-Clip.
NO sound wnated yet, until I get better at it, but this is my first saber plan. And I need to still buy the tools. i.e. Soldering Iron, Tap Handle, Wire Strippers, and a third hand.

Crystal Chambers
08-12-2010, 07:22 AM
At a quick glance it looks to me like a complete list with the exception of a blade or blade materials. I should mention since I started with a kit that the resistor included is for 1.5V disposable batteries and to use 1.2V recycleables efficiently you'll need different resistor/puck. If you wish to do so you can see the resistor chart link in the bottom right side of the store site.

Jedi-Loreen
08-12-2010, 10:36 AM
I think you mean "rechargeables". ;)