how long should the blade be?

[TI-525]

just wondering because im wanting to duel with my fan force members and they all have parks sabers

[Strydur]

Parks blades are 40" I believe

Tim
The Custom Saber Shop

[Cyambin]

yes they are

but 40" blades are...floppy. If you mean how long should the blade be, do you mean for your dimensions or what? In the movies the blades look around 30" but I didn't make the props so...

[TI-525]

ok but
how many times do you loop the the el wire on a 40 inch blade?
because you gave me 17' of el wire

[Strydur]

5 times..

40" blade.. minus about 1" for the mono plug = 39"
39" x 5 strands = 195"
195" divided by 12 = 16.25 feet

Thats why I include 17 feet of wire.

Tim
The Custom Saber Shop

[Nightwing]

So how long is an ideal blade? In the movies, it's 39 inches (1 meter), but apparently those flop around a lot. So how long can I make it without it being floppy?

[Strydur]

33-36" is a good length

Tim
The Custom Saber Shop

[Albeehotep]

I really have no problem with a 40 inch blade
but im very tall 6.6 and long armed
it all comes down to body size some of my dueling buddies have 30 inch blades.Just go with comfort
look at yoda little blade kick ass potential
Darth Albeehotep[:D][:D]

Peace is a lie there is only-- Passion!
Through passion I gain-Strength!
Through strength I gain-Power!
Through power I gain-victory!
Through victory my chains are broken !!

[LAN-ED-TUL]

i set my length so that the blade from the tip to the emitter is 36 plus whatever goes inside. so lets say, tims holder is 2 inches and its flush with the end my blade would be 38 inches not including the mono plug.

[GFORCE13]

I built a set of Dueling El Sabers(3/4"Th.) that have a 40" Blade Length and have even fought against a Shanai without any problems, but I am currently building a Led with a 1" Th. Blade and will probably go bettween 32"-36" to be more screen accurate.

May the Force
Be with You

Marc E.