PDA

View Full Version : Parts List



AEwizard
06-20-2010, 02:10 PM
I am hoping to order these parts sometime. Have any powder coating ideas?

HILT:

7" Fluted with standard style switch hole

MHS choke style 1

Screw on LED blade holder style 10

MPS Pommel style 4

8-32 x 1/8" Set screw (blade retention)

MPS Clip

MPS Insert style 9

Electronics:


Build Your Own Luxeon III Electronics Kit (red)

Cheapy Hasbro Sound.

Did i miss anything?


EDIT:

here is the picture with powder coating:


http://s794.photobucket.com/albums/yy223/sabersaver/?action=view&current=saber.png

JamoUp
06-20-2010, 03:21 PM
make sure the switch you chose is compatible with the soundboard. You should need a momentary with the cheapy boards.

AEwizard
06-20-2010, 03:46 PM
OK. i buy one at the shack

Jedi-Loreen
06-20-2010, 04:18 PM
Why buy one at RadioShack? Just add one to your order. If you buy one somewhere else, you can't guarantee that it'll fit in the switch hole properly.

AEwizard
06-20-2010, 04:41 PM
thanks.

Skottsaber
06-21-2010, 12:12 AM
And will you drill and tap your BR screw hole yourself? If you do you will need to buy a tap if you don't have one already.
Do you have a speaker? The premium speakers in the store will improve the sound quality.
I suggest you buy a few quick disconnects or JST connectors. Put one on your LED so you can change it between any other future sabers.

For PC I would get:
Main body: DFS2
Choke: CH13
Pommel: PM41

In a black color.

AEwizard
06-21-2010, 02:45 AM
Thanks for the advice. I will buy the speaker and the quick connects. I have a tap kit. Ill look into the colors. Its suppose to be a sith saber.